"All the World's a Stage We Pass Through" R. Ayana

Wednesday 5 September 2012

The end of the builder? The giant 3D printer that could create a HOUSE in 24 hours

The end of the builder?
The giant 3D printer that could create a HOUSE in 24 hours 




  • Printer can create all fixtures and fittings as it creates house layer by layer
  • Could be used to build a 2500 square foot house in a day

Scaled up 3D printing technology could be used to build a house in under 24 hours, according to an engineer from the University of Southern California.

Contour Crafting is a layered fabrication technology that uses a huge moveable gantry to build a house in the same way that a 3D printer deposits layers of plastic.

Professor Behrokh Khoshnevis claims that his Contour Crafting construction method can build entire houses with all the fixtures and fittings.

Concrete is deposited in layers through a nozzle
Concrete is deposited in layers through a nozzle that moves around the building site with the help of a gantry

Those behind Contour Crafting believe it could be used to develop entire neighbourhoods
Those behind Contour Crafting believe it could be used to develop entire neighbourhoods

Strong walls are built up layer by layer using concrete with automatic reinforcement, while plumbing and electrics are also added by the system during the building process.

The nature of the technology means it will also be possible to create curved walls and architecture that is both 'exotic' and 'beautiful', according to Khoshnevis.


Khoshnevis says current construction methods are slow, labour intensive and costly.

He believes that Contour Crafting could build houses for a fraction of the cost and in significantly less time.

Khoshnevis says that a 2500-square-foot house can be built in approximately 20 hours with Contour Crafting.

MakerBot costs around £600 and uses reels of plastic to print objects
Contour Crafting is a scaled up version of 3D printing. MakerBot (above) is a 3D printer that costs around £600 and uses reels of plastic to print objects


A 3D printed sculpture made by Michael Eden
Printed 3D sculptures such as this are becoming increasingly popular as the technology is commercialised


As a result, it could be ideal for emergency housing, commercial or low-income structures.

However, it could also be used to print out customised luxury homes, according to Khoshnevis.

Furthermore, he believes that the technology could be applied beyond our planet.

'Contour Crafting technology has the potential to build safe, reliable, and affordable lunar and Martian structures, habitats, laboratories, and other facilities before the arrival of human beings,' his website reads.

The technology has been developed over several years and was presented at the TEDx conference in February.







  
3D Printer Can Build You a House In 20 Hours: 
Welcome To The Future

 



We’ve seen 3D printers used for everything from iPhone cases to makeshift weapons, but if you think bigger, what can these new printers really be used for? Could you really make your own house with a 3D printer in less than 20 hours? Turns out you can, and the technology is now set to be used by NASA for a future Moon colony.

The man behind this ambitious housing project is Professor Behrock Khoshnevis, and he’s disgusted that in the 21st century, the world is still ridden with poverty-stricken slums characterised by make-shift corrugated iron shacks. He wanted to find a way to improve the basic concept of house construction so that it was accessible to everyone, because with better shelter comes a more civilised society.

To build a house right now, you’re looking at a slow, labour-intensive, dangerous process that’s almost always over-budget. Professor Khoshnevis said that housing construction is one of the only industries that still does things manually, unlike the motoring or technology industries for example that use automated production methods to complete routine construction tasks.

So how do you fix a slow, expensive housing concept that has been set in stone for the last few centuries so that everyone around the world can get access to it? That’s easy, Professor Khoshnevis says. You use 3D printing.

Khoshnevis is heavily involved in computer-aided design (CAD), robotics and rapid prototyping with the University of Southern California, and he’s using that experience to scale up 3D printing so that it can be used in housing construction.

“I name this process Contour Crafting, which is essentially a way of streamlining the process by benefiting from the experience we have gained in the domain of [automated and technology-assisted] manufacturing,” he told TEDxOjai attendees earlier this year.

Khoshnevis wants to build entire neighbourhoods with Contour Crafting, and he claims it can be done at a fraction of the cost in a smaller block of time.

As far as expenses go, the materials for the 3D printed house are projected to cost 25 per cent less than traditional houses and labour costs can be cut in half. In terms of timing from start to finish, Khoshnevis said that “we anticipate that an average house, like 2500 square foot house, can be built in about 20 hours from a custom design”.

Here’s how it works. A CAD design is sent to a large-scale 3D printer that is mounted to a block of land. The printer lays out the concrete-like foundation of the home through a nozzle that can move anywhere on the property. Like any 3D print-out, the house is made layer-by-layer and reinforced with various materials — like electrical, plumbing and communication infrastructure — as the build progresses.

The concrete used is a mixture of concrete and fibre polymers, meaning that it is more than three times stronger than traditional concrete used in today’s houses. The concrete that goes into your house right now can withstand roughly 3000 pounds per square inch of pressure, while the new printed concrete can withstand around 10,000 pounds per square inch.

The best thing about the construction process, Khoshnevis added, is that it can print out any house design you like. Curved walls? No problem. Water feature in your front yard? Can do. Custom tile design and a few feature walls? Simple, thanks to the addition of laser jet printer nozzles attached to the printing array.

As if that’s not impressive enough, Professor Khoshnevis’ concept is currently being supported by NASA so that the space agency can one day be used to build a colony on the Moon. You read it right, the Moon.

This is the future I want to live in. One where I can print out my own house in less than a day, for half the cost, using the same technology NASA is using on the moon. I want to go to there.



For more information about 3D printing see http://nexusilluminati.blogspot.com/search/label/3d%20printing


Help This Unique Independent Site Survive
Donate any amount and receive at least one New Illuminati eBook!
Just click in the jar -



Videos – http://www.youtube.com/watch?v=EfbhdZKPHro
 http://www.youtube.com/watch?v=JdbJP8Gxqog&feature=player_embedded#!




For further enlightening information enter a word or phrase into the search box @  New Illuminati or click on any label/tag at the bottom of the page @  http://nexusilluminati.blogspot.com


And see




 New Illuminati on Facebook - https://www.facebook.com/the.new.illuminati

New Illuminati Youtube Channel - http://www.youtube.com/user/newilluminati/feed



The Her(m)etic Hermit - http://hermetic.blog.com



The Prince of Centraxis - http://centraxis.blogspot.com (Be Aware! This link leads to implicate & xplicit concepts & images!)



This site is published under Creative Commons Fair Use Copyright (unless an individual item is declared otherwise by copyright holder) – reproduction for non-profit use is permitted & encouraged, if you give attribution to the work & author - and please include a (preferably active) link to the original along with this notice. Feel free to make non-commercial hard (printed) or software copies or mirror sites - you never know how long something will stay glued to the web – but remember attribution! If you like what you see, please send a small but heartfelt donation or leave a comment – and thanks for reading this far…

Live long and prosper!


From the New Illuminati – http://nexusilluminati.blogspot.com






1 comment:

Add your perspective to the conscious collective